Machine Information
Please note: All combinations may not be available and
can be dependant upon material
specification to be processed.
SCS Line
SCS is hot rolled black material which has been taken
through an environmentally friendly process using
engineered abrasive rolls and water to produce a
'napkin clean',
smooth, rust resistant surface.
The process does not use any chemicals, acids or
heat. Just water.
Machine Specs
Initial Material Size
Min Width 600mm
Max Width 1830mm
Min Thickness 1mm
Max Thickness 8mm
Min I/D 483mm
Max I/D 965mm
Min O/D 1200mm
Max O/D 2000mm
Max Weight 30 tonnes
Finished Material Size
Size 1I/D 508mm
Size 2 I/D 600mm
Max O/D 2000mm
Coil Pickle Line
Push-Pull hydrochloric pickle line, Supplied by Delta
Brands Inc.
Using, shallow steel-rubber covered tanks, having
an acid resistant granite liner.
Machine Specs
Initial Material Sizes
Max Width coil: 2000mm
Min Width coil: 700mm
Max Thickness: 10mm
Min Thickness: 1.40mm
Max I/D: 950mm
Min I/D: 508mm
Max O/D: 2100mm
Min O/D: 1400mm
Max Weight: 26ton
Finished Material Sizes
I/D Size: 1 610mm
I/D size: 2 762mm
O/D max: 1950mm
Slitter Machines
Slitter #1
Manufactured by Bronx Engineering
Machine Specs
Initial Material Sizes
Max Width coil: 1525mm
Min Width coil: 650mm
Max Thickness: 6.5mm
Min Thickness: 2.0mm
Max I/D: 950mm
Min I/D: 508mm
Max O/D: 2000mm
Max Weight: 25ton
Processing Capabilities
Max Cuts at Min Thickness: 18
Max Cuts at Max Thickness: 3
Finished Material Sizes
Width Min: 40mm
I/D Size 1: 508mm
I/D size 2: 610mm
Max O/D: 2000mm
Weight max: 25ton |
Slitter #2
Machine Specs
Initial Material Sizes
Max Width coil: 1525mm
Min Width coil: 750mm
Max Thickness: 2.8mm
Min Thickness: 0.30mm
Max I/D: 950mm
Min I/D: 508mm
Max O/D: 2000mm
Max Weight: 25ton
Processing Capabilities
Max Cuts at Min Thickness: 24
Max Cuts atMax Thickness: 5
Finished Material Sizes
Width Min: 30mm
I/D Size 1: 508mm
I/D size 2: 610mm
Max O/D: 2000mm
Weight Max: 25ton
To increase the maximum finished coil weight a
coil car and mandrel support was installed during
2004. |
Slitter #3
Machine Specs
Machine Specs
Initial Material Sizes
Max Width coil: 600mm
Min Width coil: 20mm
Max Thickness: 2.00mm
Min Thickness: 0.30mm
Max I/D: 610mm
Min I/D: 508mm
Max O/D: 1775mm
Max Weight: 6ton
Processing Capabilities
Max Cuts at
Min Thickness: 12
Max Cuts at Max Thickness: 6
Finished Material Sizes
Width Min: 14mm
I/D Size 1: 406mm
I/D size 2: 508mm
Max O/D: 1775mm
Weight Max: 2,500kg |
Decoiler Machines
Decoiler #1 Manufactured by SEKO Engineering
Machine Specs
Initial Material Sizes
Max Width coil: 2000mm
Min Width coil: 650mm
Max Thickness: 14mm
Min Thickness: 3mm
Max I/D: 950mm
Min I/D: 508mm
Max O/D: 2000mm
Min O/D: 1000mm
Max Weight: 25.00ton
Finished Material Sizes
Min Length: 1000mm
Max Length: 10,000mm
Max Weight: 6ton |
Decoiler #2
Manufactured by Bronx Engineering
Machine Specs
Initial Material Sizes
Max Width coil: 2000mm
Min Width coil: 850mm
Max Thickness: 4.0mm
Min Thickness: 0.90mm
Max I/D: 950mm
Min I/D: 508mm
Max O/D: 2000mm
Min O/D: 1000mm
Max Weight: 25ton
Finished Material Sizes
Min Length: 1000mm
Max Length: 6000mm
Max Weight: 4ton |
|
 |
Traceability
Notes
Weighbridge
station
At the weighbridge the material is allocated a unique
coil reference number.
Parent material ID label is printed
Unloading area
Parent material ID label is attached.
Material entered on computer system.
Customer faxed with incoming advice and stock number.
Material is periodically checked while awaiting processing.
If details change (e.g. ownership) they are made here.
Pre-processing of material
Material to be processed selected by customer using
unique reference number.
We receive faxed order instructions.
Production Order raised on business system, approved
and scheduled for processing.
Processing materail
Processing instructions expedited.
Post processing of material
Unique ID labels produced for each unit item processed.
Despatch of Material
Collecting driver issued collection
note at weighbridge on entry.
Loading team issue driver with loading note.
At weighbridge, collection and loading notes checked
to see that they tally.
Advice note issued.
Computer stock record updated.
Driver departs with material
Request A Call
We can call you. If you would like to talk to us, provide
us with a contact number and we will telephone you very
soon.
|
